Facade systems

The beauty of technical solutions, expressed in units and optimal details, simplicity and ease of installation

— Prefabrication of products — 95%, which reduces the mounting influence of the human factor to a minimum

— The compliance in the treatment gives the advantage in productivity

— The lack of vertical deformation of brackets under the influence of weight loads

— Ability to attach a short guide on one arm

— Possibility of fastening the bearing brackets only in the floor slabs with a weak bearing capacity of the building envelope

— Extruded elements of the system do not require additional trimming and always correspond to the specified dimensions visibility calculation and obvious solution — the result of years of evolution fasadostroeniya leading European companies

— Term maintenance-free operation of the front system 50 years

— Maximum take-away cladding material (screen) of the building envelope — 500mm

— Application to the various buildings of all levels of responsibility, degree of fire resistance and classes of functional and constructive danger

— Fire hazard class system — R0

— The reliability of the system is proved by experience the use of the system at the facilities of up to 260m

Classical mounting system NordFox

— It has a minimum of parts, aluminum is easily machined, so the system is simple and easy to install.

— The development of cross-section of the heel bracket allows by reducing the load on the anchor carrier and a greater ability to increase vertical heel step brackets in comparison with other systems.

— A set of different cross section profiles for the selection of optimal variant for every specific case.

— Possible to mount elements of the system to each other as rivets and screws.

— Brackets cell cross sections XFOX give greater rigidity of the system or allow to mount it horizontally.

The facade system MTC-v-350
Fixing decorative gypsum partition tile under the brick on the rails

The facade system MTC-v-350
Fixing decorative tiles under brick with notch strips

The facade system MTC-v-350
Fixing terracotta tiles vertically on a horizontal half-timbered

The facade system MTC-v-350
Fixing terracotta plates with aluminum clamps

The facade system MTC-v-350
Fixing terracotta tiles

The facade system MLK-v-300 Deco
Mount decorative facing on the sandwich panel

The facade system MLK-v-300
Mounting plates of large format porcelain cassette method

The facade system MLK-v-300
Mounting plates of large format porcelain tiles in a combined way

The facade system MLV-v-20
Attaching cladding panels hidden method for notch

The facade system MLV-v-20
Attaching cladding panels hidden way with reinforced horizontal profiles

The facade system MLV-v-20
Attaching cladding panels hidden manner with clasp

Facade system MTH-v-100
Concealed fixing of cassette panels with Hat profile

Facade system MTH-v-100
Concealed fixing of cassette panels

The facade system MTA-v-100
Mounting sheet materials visible way

The facade system MTC-v-100
Mounting plates of porcelain visible way

Half-floor mounting system
H profile

Half-floor mounting system
DT profile